Select brand and country
Select language
Contact us
Search
Your Watchlist is still empty. When you click the red plus (+) button, you add products to your individual selection. You can then download your Watchlist as a PDF document or send it as an email.
You can find your current product selection here. You can download your Watchlist as a PDF document or send it by email at any time.
New generation of construction sealing Extremely adaptable sealing tapes for the construction industry
Sealing tapes with a wide range of advantages
Technologically, all new sealing tapes are based on the proven adhesive of the SPS series. This means that the strengths of this product line, which are appreciated by many industries, can now also be used for building sealing. The sealing tapes from Coroplast Tape offer different advantages depending on the design. So you will always find the right solution for your individual area of application.
Coroplast 1720 SPS / 1721 SPS
-
The backing material of this single-sided adhesive tape consists of a UV-stable PP film. -
Application example of Coroplast 1721 SPS.
SPS – versatile and at the same time convenient to process
Whether (rough) plaster, concrete, roof tar, OSB, wood, EPS, XPS, PIR and much more – all new SPS sealing tapes have a high adhesive strength. They stick securely to a wide variety of surfaces. At the same time, the acrylic mass reliably coats even very rough surfaces, as the adhesive flows into the roughness and interlocks with the substrate. This allows them to seal connection joints, cracks, seams or overlaps.
Compared to the often common butyl tapes or bitumen coatings, the application with our sealing tapes is much more practical:
- Simply clean/brush off the substrates,
- apply the tape,
- press it on and done – and your fingers stay clean.
Even at low temperatures it works. In most cases, an additional primer is not needed. In addition, no additional setting time is required, compared to liquid systems.
Coroplast 1635 SPS / 1655 SPS / 1665 SPS
-
Coroplast 1665 SPS: The carrier material of this high-performance sealing tape consists of a cold-resistant laminate of special thermoplastic and aluminum. -
Application example of Coroplast 1655 SPS.
Even after several years of outdoor exposure, the bonding looks new and seals perfectly.
Coroplast 1855 SPS
-
The carrier material of this sealing tape consists of a plasterable special PET/PA non-woven film. -
Application example of Coroplast 1855 SPS.
Important advantages of our SPS sealing tapes
Our sealing products open up a safe and economical method of waterproofing buildings and bring the following strengths to the table, depending on the design:
- different carrier materials:
- 2-ply laminate special thermoplastic and aluminum.
- 4-ply laminate special thermoplastic and aluminum
- UV-stable PP film
- special PET/PA non-woven film
- high flexibility
- extremely high adhesive strength on a wide range of smooth and rough substrates
- UV and weather resistant
- high aging resistance
- resistant to cold
- no bleeding of the adhesive
- patented technology
YOUR CONTACT PERSON Sealing tapes
YOUR CONTACT PERSON Sealing tape
